Low Air Pressure DTH Bit

Sansung company makes and supplies the finest and most efficient Down-the-Hole (DTH) hammers and bits for the mining, construction and water well industries.

Drill and blast engineers and water well contractors trust Sansung's DTH equipment because of the precision engineering and high standards of drilling efficiency built into each of our hammers and bits.

CIR series DTH hammer, a kind of valve-equipped Low-Air-Pressure hammer with single piston, a plate valve and a central exhaust structure. The compressed air is adopted as the driving force. To prevent dust pollution and get a better performance, some high-pressure water may be added into the air for wet rock drilling.

It is mainly featured in:

1. The strong energy of single impact and the low engergy consumption in rock crushing.

2. The weight ratio of piston and bit almost reaches 1:1 to provide long effective acting time, which leads to the improved efficiency in rock crushing and the extended service life of the drilling tool.

3. A good performance in central air exhaust and cutting discharge, which reduces the repeated crushing of rock.

4. A check valve device is available to drill holes under water.

The CIR series DTH hammer, an ideal drilling tool, is widely used in such industries relating to energy,transportation,metallurgy,building, etc...

Hammer Model	Diameter		No.*button dia. (mm)		No.	Weight
	mm	inch	gauge buttons	front buttons	flushing hole	kg
CIR70	76	3	5*Φ12	3*Φ12	3	2.5
CIR90	90	3 1/2	6*Φ14	4*Φ12	3	3.3
	100	4	6*Φ14	5*Φ12	3	4.2
CIR110	110	4 3/8	6*Φ14	5*Φ14	3	6.2
	120	4 3/4	6*Φ14	6*Φ13	3	7.2
	130	5 1/8	7*Φ14	6*Φ14	3	8.2